Laundry powder equipment tower-less molding production equipment is a new type of laundry powder production process. It does not require a traditional spray drying tower. Instead, it uses a special granulator to directly form the laundry powder slurry into granular laundry detergent. powder, thus saving energy, space and cost, and improving production efficiency and product quality.
The main features of towerless molding production equipment for washing powder equipment are: The granulator of the tower-less molding production equipment adopts biaxial stirring and extrusion, so that the washing powder slurry forms uniform particles under high pressure with good fluidity and solubility. The size and shape of the particles can be adjusted as needed. . The granulator of towerless molding production equipment can adapt to different formulas and raw materials, and can produce different types of laundry detergents, such as high-foaming, low-foaming, concentrated, non-phosphorus, biological enzymes, etc., to meet different market needs. The granulator of tower-less molding production equipment can achieve continuous production without shutting down for cleaning, reducing production time and labor costs, and improving production efficiency and profits.
The granulator of tower-less molding production equipment does not require a spray drying tower, which saves a lot of energy such as steam, water, electricity and air, reduces production costs and environmental pollution, and meets the requirements of energy conservation and emission reduction. The main process flow of towerless molding production equipment for washing powder equipment is as follows: Raw material pretreatment: Weigh the raw materials according to the formula proportion, and then send them to the mixer for mixing to make the raw materials fully uniform. Slurry preparation: Feed the mixed raw materials into the slurry preparation machine, add an appropriate amount of water and other auxiliary materials, and carry out stirring, heating, dissolving, neutralizing, aging and other processes to make the washing powder slurry.
Granulation and molding: The washing powder slurry is fed into the granulator, and after biaxial stirring and extrusion, granular washing powder is formed. The size and shape of the particles can be controlled by adjusting the parameters of the granulator. Drying and cooling: Send the granular washing powder into the dryer, use hot air or hot air to dry it, so that the moisture of the washing powder is reduced to a suitable level, and then send it to the cooling machine for cooling, so that the temperature of the washing powder is reduced to room temperature.
Post-processing: Send the dried and cooled washing powder to a screening machine for screening to remove particles that are too large or too small, and then send it to a post-processing machine to add post-processing agents such as flavors, enzymes, and whitening agents for mixing and processing. Spraying, coating and other processes improve the performance and quality of laundry detergent. Packaging, storage and transportation: Send the processed washing powder into the packaging machine for automatic or semi-automatic packaging, then store and transport it, and sell it to the market.
