In the case of producing caustic soda, the production workshop should be closed for practical operation, with natural ventilation on all sides to ensure the gas properties. And the operators who actually operate have to go through learning and training and also strictly follow the operating procedures. If you accidentally touch it, it will cause a burn, and in severe cases, it may even cause cardiac arrest. Therefore, it is necessary to strictly follow the relevant requirements to do a good job in the protection operation.
1) The actual operators who produce and make flakes of caustic soda should wear filter-type gas masks (half masks) and anti-static work clothes.
2) It is necessary to put an end to workplaces such as ghost lamps and pyrogens, and smoking is prohibited.
3) Apply explosion-proof exhaust system and machinery and equipment. Prevent steam from escaping into the workplace air. Avoid contact with reducing agents, acids, alkaline earth metals, allylamine.
4) When canning, the water flow should be controlled, and there is a grounding system to prevent electrostatic induction accumulation.
5) Equipped with fire-fighting equipment and leakage emergency treatment equipment of relative variety and total number.
6) The environmental humidity of the warehouse should not exceed 85%, and the packaging should be sealed to avoid returning moisture.
7) Appropriate raw materials should be kept in the alkali storage area to save the leakage.
The regulations on the natural environment in the production and production of flake soda are relatively strict, and the protection of the relevant ecological environment and the protective measures of operators, protective measures and emergency treatment levels should also be prepared at all times.
