Concentrated washing powder is mainly formed by mixing and agglomerating raw materials such as surfactant, soda ash, silicate, and essence according to the formula to form solid particles. Compared with high tower powder, it is characterized by high density, low foam, and low investment and operating costs.
The company can provide the design and construction of fully automatic or semi-automatic concentrated washing powder production lines.
Process introduction
Powder raw materials such as soda ash, Glauber's salt, zeolite, pentasodium and other small bags (25-50Kg) or large bags enter the factory, and the raw materials are sent to the raw material warehouse platform by the elevator, and then put into the respective raw material warehouses after manual unpacking. The raw material warehouse is equipped with a weighing device. According to the setting of the formula and control program, the weight is automatically reduced and measured and automatically sent to the mixer through the corresponding conveying equipment according to the set program.
Liquid raw materials such as essence, non-ionic, LABSA, etc. are packed into the factory, and the liquid materials are sent to the respective liquid tanks by the bucket pump, and then automatically measured by the respective metering pumps, and automatically transported to the mixing according to the sequence set by the program. It is atomized in the device, and the atomized liquid droplets and powder raw materials are mixed and reacted while stirring, and the powder and liquid are mixed uniformly according to the set mixing time.
Manually/automatically open the discharge valve under the mixer, and the belt conveyor sends the material to the screening machine for screening. The concentrated powder that meets the particle requirements is lifted from the lifting equipment to the finished product warehouse, and the finished product warehouse is connected to the packaging machine. The semi-automatic packaging machine automatically weighs, the weighing specifications can be set according to the needs, the bag is manually placed and the material is fed, the electronic table is used to check the weight, the sealing is heat sealed, the sealing quality is checked, and the packing, packing, palletizing, and then sending it by trolley to the finished product warehouse.
