What Is Powder Detergent?

Powder Detergent

Both the powder detergent and the production process - the SILFOAM® defoamer, provides the

necessary foam control. WACKER offers a variety of foam control systems for three powder

detergent manufacturing processes.

Ready-to-use silicone defoaming powder after the addition of technology

Antifoam powder production in the factory - through powder premixing process

After spray drying, the defoaming powder is sprayed with other heat sensitive ingredients.

Silicone defoamers are also used to degrease the slurry before the spray drying process.

Spray process

We recommend the use of phosphate as the main component of the powder detergent should be

sprayed. Compared with silicone technology, it has many striking advantages. It is not only

more economical, but also because the additive adheres to the surface of each detergent

particle, so that the defoaming product is always uniformly dispersed in the detergent powder.

In addition, since the mixture having a silicone content of 100% is much lower than the

addition amount of the silicone powder defoamer in the content of 15%, the method is suitable

for more formulations.

Powder premixed production

These silicone defoaming compounds are suitable for the production of defoaming powders or

granules, the so-called plant premixes. They are added as an active substance to the powder

base in a proportion of 5-20%. The antifoam activity increases with the viscosity of the

compound. By heating, viscosity can be reduced and sprayed.

The slurry is degassed

WACKER's silicone defoamers are also used to degass the detergent slurry during spray drying.

The method ensures that the material flow process without beating, no compression, but also

adjust the density of the powder.

Add: 9 Qingchun Road, hangzhou, Zhejiang, China

Contact: Yi Fei

Tel: +86-571-87228886

Mob: +8613600538853

Fax: +86-571-87242887