To prevent it from leaking, once it leaks, it is necessary to isolate the leaked contaminated area and restrict access. Block the fire source. It is recommended that emergency responders wear dust masks (full face masks) and general factory uniforms. Use a clean shovel to collect in the monotonous, several first aid methods for improper use of flake alkali: Inhalation: quickly leave the scene to fresh air.
Keep the airway clear, if breathing is difficult, give oxygen. If breathing is interrupted, give artificial respiration immediately. seek medical attention. Ingestion: If swallowed by mistake, rinse mouth with water and drink milk or egg white. seek medical attention. Skin Contact: Immediately remove contaminated clothing and clean with plenty of water for at least 15 minutes. seek medical attention.
Eye Contact: Immediately lift the eyelids and rinse thoroughly with plenty of water or saline for at least 15 minutes. seek medical attention. If many leaks, collect for recycling or transport to waste disposal site for disposal. The demand for caustic soda is very large in daily life. When it is reserved, it must not only store a large amount, but also facilitate transportation and ensure safety.
Soda flakes are usually packed in 25kg three-layer plastic woven bags, the inner and outer layers are plastic woven bags, and the middle layer is a plastic inner film bag. Flake caustic soda is an alkaline corrosive product and belongs to the eighth-level risk product, so special attention must be paid when storing it, and it should be stored in a ventilated and dry warehouse or shed. The packaging container should be intact and sealed. Do not store and transport together with flammables and acids. Pay attention to moisture and rain during transportation. In the event of a fire, water, sand and various fire extinguishers can be used to remedy the situation.
